Picture of Rhodes Hall - Engineering Rhodes Hall. Source: University Photography

Conference Program

Special Dates
Event Date
Comments/Questions: E-mail srf2005@lepp.cornell.edu
Welcome Reception July 10th, 2005
Boat Tours July 10th and 11th, 2005
Concert July 12th, 2005
Tour of Watkins Glen and picnic July 13th, 2005
Banquet July 14th, 2005
CESR/SRF tours July 15th, 2005

Call for abstracts

The online abstract submission for the SRF2005 Workshop is now closed as of June 15th, 2005.

Workshop site

The Workshop will be held on the Cornell University campus. Plenary sessions and tutorials will be held in the Olin Hall Auditorium (rm. 155). Parallel tutorials will be in the second floor Olin Hall Auditorium (rm. 255). Poster sessions and an industrial exhibition will be in the Willard Straight Hall Memorial Room. The workshop office (rm. 216), publication and registration office (rm. 128), and computer room (rm. 145) will be located in Olin Hall. Wireless internet access will be set up in Olin Hall.

Tutorials

Following the SRF2003 workshop, we decided to have tutorials for students and individuals new to the field of RF superconductivity. A special session, exclusively for tutorials, will take place in the Olin Hall Auditorium on Sunday from 9:00 a.m. to 3:30 p.m., with lunch break from noon till 2:00 p.m.

Plenary Sessions

Plenary sessions will be held in the Olin Hall Auditorium on Monday (all day) and in the morning on Tuesday, Wednesday, Thursday, and Friday. The morning sessions will start at 8:30 a.m. and end at approximately noon. The Monday afternoon session will start at 2:00 p.m. and end at 5:30 p.m.

Poster Sessions

Two poster sessions are scheduled for Tuesday and Thursday afternoon from 2:00 p.m. to 5:00 p.m. in the Willard Straight Hall Memorial Room. Posters must be mounted half an hour before the poster session begins, attended through at least the major part of the session, and removed immediately after the end of each session. Workshop staff will be available prior to each poster session to assist authors.

Poster Guidelines are now available. Please read this if you are presenting a poster.

Industrial Exhibition

An industrial exhibition will be open Tuesday and Thursday during poster sessions in the Willard Straight Hall Memorial Room.

PDF version of the Program

Sunday, July 10th

Time Tutorials (155 Olin Hall)

Session Chair: M. Liepe (Cornell)

Session secretaries: A. romanenko (Cornell), M. Gusarova (MEPHI)

Parallel Tutorials (255 Olin Hall)

Session Chair: J. Delayen (JLab)

Session secretaries: G. Eremeev (Cornell), A. Dangwal (U. of Wuppertal)

9:0AM-9:50AM Basic Principles of SRF

K. Saito (KEK)

-
10:00AM-11:00AM High-beta cavity design

S. Belomestnykh and

V. Shemelin (Cornell)

Low-beta cavity design

A. Facco (INFN-legnaro)

11:00AM-12:00PM Input couplers for superconducting cavities - design and test

W. Moeller (DESY)

The Nb-oxide system

J. Halbritter (Karlsruhe)

12:00PM-1:30PM Lunch (on your own)

Session Chair: A. Facco (INFN-Legnaro)

Session secretaries: E. Watson (Cornell), P. Sekalski (DMCS-TUL / DESY)

Parallel Tutorials (255 Olin Hall)

Session Chair: K. Saito (KEK)

Session secretaries: J. Silterra (Cornell), D. Tonini (INFN-LNL)

1:30PM-2:20PM Ponderomotive instabilities and microphonics

J. Delayen (JLab)

Cleanliness techniques

D. Reschke (DESY)

2:30PM-3:30PM Theory and practice of cavity test systems

T. Powers (JLab)

Cryomodule design, assembly, alignment

C. Pagani (DESY / INFN-Milano

3:30PM-4:00PM Transport to Cayuga Lake
4:00PM-6:00PM Boat tour on Cayuga Lake
6:00PM-6:30PM Transport to Cornell
6:30PM-9:30PM Welcome Reception (Willard Straight Memorial Room)

Monday, July 11th 2005

Plenary Workshop Opening (155 Olin Hall)

Session Chair: D. Proch (DESY)

Session secretaries: B. Stuhl (Cornell), Z. Conway (U. of Illinois Urbana-Champaign)

9:00AM-9:10AM Welcome

M. Tigner (Cornell)

9:10AM-9:25AM Logisitcs

S. Belomestnykh (Cornell)

9:25AM-10:00AM Introduction – SRF: Two hectic years

H. Padamsee (Cornell)

New Projects In-Stream

Session Chair: C. Pagani (DESY / INFN-Milano)

Session secretaries: R. Calaga (BNL), M. Delheusy (Max-Planck-Institute fuer Metallforschung / CEA)

10:00AM–10:30AM Status of SNS

I. Campisi (ORNL/SNS)

10:30AM–11:00AM Coffee break
11:00AM–11:30AM Status of TTF

L. Lilje (DESY)

11:30AM–12:00PM A 100 MV cryomodule for CW operation

C. Reece (JLab)

12:00PM–12:30PM SRF in storage rings

M. Pekeler (ACCEL)

12:30PM–2:00PM Lunch (on your own)
Advances in SRF Technology - I

Session Chair: K. Shepard (ANL)

Session secretaries: P. Quigley (Cornell), M. Souli (IPN Orsay)

2:00PM–2:20PM Structures for RIA and FNAL booster

M. Kelly (ANL)

2:20PM–2:35PM SPIRAL-2 resonators

G. Devanz (CEA-Saclay)

2:35PM–2:50PM The HW resonators in Juelich

R. Stassen (FZ-Juelich)

2:50PM–3:05PM Niobium sputtered QW resonators

A. Porcellato (INFN-legnaro)

3:05PM–3:20PM Superconducting RFQs

G. Bisoffi (INFN-Legnaro)

3:20PM–3:35PM Recent progress in the superconducting RF program at TRIUMF/ISAC

R. Laxdall (TRIUMF)

3:35PM–3:50PM Coffee break

Session Chair: L. Lilje (DESY)

Session secretaries: J. Sears (Cornell), H. Jenhani (LAL Orsay)

2:00PM–2:20PM Structures for RIA and FNAL booster

M. Kelly (ANL)

3:50PM–4:10PM Performance of medium-beta elliptical cavities

J. Ozelis (JLab)

4:10PM – 4:30PM Physical and mechanical properties of single and large crystal high-RRR niobium

G. Myneni (JLab)

4:30PM – 4:45PM Performance of large grain and single crystal niobium cavities

P. Kneisel (JLab)

4:45PM – 5:05PM Seamless/bonded niobium cavities

W. Singer (DESY)

5:05PM – 5:25PM Progress on Nb-Cu coating techniques

S. Calatroni (CERN)

5:25PM – 5:45PM High-Tc: New developments & progress on understanding the mechanisms & hope for the future

T. Tajima (LANL)

5:30PM – 6:00PM Transport to Cayuga Lake
6:00PM – 7:30PM First Boat Tour
7:30PM – 9:00PM Second Boat Tour

Tuesday, July 12th 2005

Basic SRF Topics (155 Olin Hall)

Session Chair: P. Kneisel (JLab)

Session secretaries: M. Souli (IPN Orsay), M. Meidlinger (MSU)

8:30AM – 9:00AM Theoretical advances in SRF

A. Gurevich (University of Wisconsin)

9:00AM -9:20AM Advancement in comprehension of the Q-slope for superconducting cavities

E. Palmieri (INFN-Legnaro)

9:20AM -9:50AM Review of Frontier Workshop and Q-slope results

G. Ciovati (JLab)

9:50AM – 10:10AM Review of new shapes for higher gradient

R. Geng (Cornell)

10:10AM – 10:30AM Coffee break
10:30AM – 1:00PM Students/Young Researchers

Session Chair: E. Palmieri (INFN-Legnaro)

Session secretaries: S. Musser (MSU), H. Jiang (MSU)

10:30AM – 10:45AM Design and prototype of a high-current multi-cell elliptical cavity

D. Meidlinger (MSU)

10:45AM – 11:00AM Pulsed-operation of SC spoke cavities

Z. Conway (Argonne)

11:00AM – 11:15AM ERL 5-cell cavity design for high currents

R. Calaga (BNL)

11:15AM – 11:30AM New results on high-field Q-slope

G. Eremeev (Cornell)

11:30AM – 11:45AM SC Cavities at 3.9 GHz

T. Koeth (Fermilab)

11:45AM – 12:00PM Surface studies of niobium chemically polished under conditions for SRF cavity production

H. Tian (JLab)

12:00PM – 12:15PM General automation of LLRF control for superconducting accelerators

A. Brandt (DESY)

12:15PM – 12:30PM New magnetron configurations for Nb onto Cu

G. Lanza (INFN-Legnaro)

12:30PM – 12:45PM A-15 superconductors - Alternative to niobium for RF cavities

S. Deambrosis (INFN-legnaro)

12:45PM – 1:00PM Flux gate magnetometry applied to cavities

C. Bonavolonta (INFN-Legnaro)

1:00PM – 1:15PM High CW power input coupler design

M. Gusarova (MEPHI)

1:15PM – 1:30PM Piezoelectric stack based system for Lorentz force compensation

P. Sekalski (DMCS-TUL / DESY)

1:30PM – 2:15PM Lunch (on your own)
2:15PM – 5:15PM Poster Session (Willard Straight Memorial Room)
5:30PM – 7:00PM Industrialization Symposium (155 Olin Hall)

Organized by D. Proch (DESY)

Part 1: Presentation of past, ongoing or planned laboratory activities for industrialization

a) CERN (LHC)

TBD

b) DESY (XFEL)

cavity fabrication & treatment - D. Proch (DESY)

input coupler - T. Garvey (IN2P3)

module assembly - B. Petersen (DESY)

c) KEK

TBD

d) FNAL activities towards industrialization

N. Lockyer (FNAL)

e) Comments by industry

all

Part 2: Presentation/information about existing "Industry Forum"

a) Linear Collider forum of Japan

N. Nishi (LCF of Japan)/td>

b) Linear Collider forum of Europe

M. Peiniger (ACCEL)

c) Formation of an USA Industrial Consortium for ILC

T. Favale (AES)

Part 3: Open discussion about best coordinated way to industrialization of SRF technology

Contributions by industry and laboratory partners

Part 4: Conclusions and outlook

7:30PM Free Concert (Performing Arts Center)

Wednesday, July 13th 2005

Moderated Discussions on Hot Topics (155 Olin Hall)

Session secretaries: D. Tonini (INFN-LNL), D. Meidlinger (MSU)

8:30AM – 9:30AM Topic 1: High-field Q-slope

Moderator: P. Kneisel (JLab)

9:30AM – 10:30AM Topic 2: Surface Analysis

Moderator: C. Antoine (CEA-Saclay)

10:30AM -11:00AM Coffee break
11:00AM – 12:30PM Topic 3: Spoke vs Elliptical cavities for beta = 0.5

Moderator: F. Krawczyk (LANL)

12:30PM – 2:00PM Lunch (on your own)
2:00PM – 5:00PM Watkins Glenn Outing
6:00PM – 8:30PM Taughannock State Park: Barbeque/Volleyball/Badminton/Frisbee

Thursday, July 14th 2005

Advances in SRF Technology - II (155 Olin Hall)

Session Chair: S. Noguchi (KEK)

Session secretaries: J. Silterra (Cornell), P. Sekalski (DMCS-TUL / DESY)

8:30AM–9:00AM Superconducting RF Test Facility (STF) in KEK

H. Hayano (KEK)

9:00AM–9:30AM Results from the new Linear Collider Test Facility at Fermilab

H. Edwards (Fermilab)

9:30AM-10:00AM Review of various approaches to address high currents in SRF electron linacs

I. Ben-Zvi (BNL)

10:00AM–10:30AM A Review of the design and performance of CW and pulsed high-power couplers

T. Garvey (LAL-Orsay)

10:30AM–11:00AM Coffee break

Session Chair: I. Ben-Zvi (BNL)

Session secretaries: A. Romanenko (Cornell), Z. Conway (U. of Illinois Urbana-Champaign)

11:00AM–11:20AM Advances in electromagnetic modeling through high performance computing

K. Ko (SLAC)

11:20AM–11:40AM Review of uperconducting RF guns

D. Janssen (FZ-Rossendorf)

11:40AM–12:00PM Review of slow and fast tuners

S. Simrock (DESY)

12:00PM–12:20PM Review on progress in RF control systems

M. Liepe (Cornell)

12:20PM–12:40PM Crab cavity development

K. Hosoyama (KEK)

12:40PM–1:00PM Summary of Industrialization Symposium

D. Proch (DESY)

1:00PM–2:00PM Lunch (on your own)
2:00PM–5:30PM Poster Session (Willard Straight Memorial Room)
6:00PM–7:00PM Reception at Johnson Art Museum
7:00PM–10:00PM Banquet at Statler Hotel

Friday, July 15th 2005

\
Future Facilities (155 Olin Hall)

Session Chair: N. Lockyer (University of Pennsylvania)

Session secretaries: G. Eremeev (Cornell), M. Delheusy (Max-Planck-Institute fuer Metallforschung / CEA)

8:30AM – 8:55AM The Rare Isotope Accelerator (RIA)

R. York (MSU)

8:55AM – 9:20AM Proton driver

W. Foster (Fermilab)

9:20AM -9:45AM European RIB

M. Di Giacomo (GANIL)

9:45AM – 10:10AM ERL workshop review

M. Dykes (ASTeC Daresbury)

10:10AM – 10:35AM Future FELs

J. Corlett (Berkley)

10:35AM – 11:00AM European X-FEL Project

K. Floettmann (DESY)

11:00AM – 11:15AM Coffee break
ILC fest

Session Chair: H. Edwards

Session secretaries: B. Stuhl (Cornell), E. Watson (Cornell)

11:15PM – 11:30PM Accelerator physics challenges of the ILC

G. Dugan (Cornell)

11:30PM – 12:00PM Challenges of International Collaboration

M. Tigner (Cornell)

12:00PM – 12:30PM GDE expectations from SRF community

B. Barish (Caltech)

12:30PM – 1:00PM Awards/Closing
1:00PM – 3:00PM Lunch (on your own)
3:00PM – 5:00PM CESR/SRF Tours (on request)

Breakfast will be provided Monday through Friday starting at 7:45AM.


PDF Version